The brake system uses a signal red BRAKE warning lamp located
in the instrument panel. When the ignition switch is in the START position,
the BRAKE warning lamp should come on. It should go off when the ignition
switch returns to the RUN position. The following conditions will activate
the BRAKE warning lamp:
| • | When the parking brake is applied. The lamp should be on when
the parking brake is applied and the ignition switch is in ON. |
| • | When the master cylinder fluid reservoir is low.
The ABS lamp will also illuminate until the reservoir is filled to the proper
level. |
There are two status indicator lamps used with the ABS/TCS system.
They are all amber and are located in the instrument panel.
| • | ABS - indicates a condition present in the ABS which requires
service. |
| • | TCS - indicates the TCS has been turned off, a condition is present
in the TCS which requires service or the ABS is currently in a
wheel-lock control condition. |
