GM Service Manual Online
For 1990-2009 cars only

Blower Motor Always On CJ2

Blower Motor Operates Continuously (CJ2)

Step

Action

Value(s)

Yes

No

DEFINITION: Blower motor is on at any selected speed.

1

Was the blower motor system check performed?

--

Go to Step 2

Go to HVAC Blower Control (CJ2) System Check

2

  1. Disconnect the HVAC programmer module connector.
  2. Turn the ignition switch to the RUN position.

Is the blower motor on?

--

Go to Step 3

Go to Step 4

3

  1. Turn the ignition switch to the OFF position.
  2. Disconnect the blower motor control module connector.
  3. Connect a test light between terminal C of the blower motor control module connector and a known good ground.

Does the test light illuminate?

--

Go to Step 5

Go to Step 6

4

Replace the HVAC programmer module.

Is the replacement complete?

--

Recheck System Operation

--

5

Connect a test light between terminal B of the HVAC programmer module connector and a known good ground.

Does the test light illuminate?

--

Go to Step 6

Go to Step 5

6

Locate and repair a short to B+ in CKT 63.

Is the repair complete?

--

Recheck System Operation

--

7

Replace the blower motor control module.

Is the replacement complete?

--

Recheck System Operation

--