GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1997 🢒 Corvette 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Headlamp Motor/Actuator Replacement

Removal Procedure

    Object Number: 64691 Size: SH
  1. Remove the appropriate headlamp assembly from the vehicle. Refer to Headlamp Assembly Replacement .
  2. Disconnect the headlamp wiring harness electrical connectors from the headlamp bulbs.

    3. Important: Take note of the linkage-to-motor relationship for reassembly.

  3. Remove the nut retaining the headlamp assembly pivot arm to the headlamp motor/actuator.
  4. Remove the three bolts mounting the motor to the headlamp assembly.
  5. Remove the headlamp motor/actuator.

Installation Procedure

    Object Number: 64691 Size: SH
  1. Install the motor/actuator into position on the headlamp assembly.
  2. Install the pivot arm to the motor.

    3. Place the pivot arm in the position noted earlier.

  3. Loosely install the nut retaining the headlamp assembly pivot arm to the motor.
  4. Install the three bolts mounting the headlamp motor to the headlamp assembly.

    5. Tighten

        • Tighten the headlamp motor mounting bolts to 6.8 N·m (60 lb in).
        • Tighten the headlamp assembly pivot arm nut to 5.6 N·m (50 lb in).
            Install the headlamp assembly to the vehicle. Refer to Headlamp Assembly Replacement .
  5. Connect the headlamp wiring harness electrical connectors to the headlamp bulbs.