Underhood Lamp Replacement Assembly

1. Open the hood.
2. Disconnect the electrical connector from the underhood lamp assembly.



3. Drill out the two rivets retaining the underhood lamp assembly.
4. Remove the underhood lamp from the vehicle.

1. Install the underhood lamp assembly into position under the hood.
2. Install 2 new underhood lamp retaining rivets.



3. Connect the electrical connector to the underhood lamp assembly.
4. Close the hood.

Underhood Lamp Replacement Bulb

1. Remove the underhood lamp lens cover.

Grasp the lens cover and depress the upper and lower locking tabs to release.

2. Remove the bulb from the underhood lamp.

Gently grasp the bulb, lift the bulb to release tension, then swing the top edge of the bulb away from the connector.

1. Install the bulb into the underhood lamp.

Gently grasp the bulb, connect the lower edge of the bulb onto the lower connector, lift the bulb, then swing the top edge of the bulb onto the upper connector.

2. Install the underhood lamp lens cover.

Snap the lens cover locking tabs into place.