GM Service Manual Online
For 1990-2009 cars only

PRNDL Illumination is ON at all times

Step

Action

Value(s)

Yes

No

1

Were you sent here from the Interior Lights Dimming Diagnostic System Check?

--

Go to Interior Lights Dimming Diagnostic System Check

--

2

  1. Disconnect the body control module connector C3.
  2. Disconnect the BTSI control solenoid (4-pin) connector.
  3. Connect a DMM between the BTSI control solenoid (4-pin) connector terminal B and ground.
  4. Check for continuity to ground in CKT 8.

Is CKT 8 shorted to ground?

--

Go to Step 3

Go to Step 4

3

Repair a short to ground in CKT 8.

Is the repair complete?

--

Go to Interior Lights Dimming Diagnostic System Check

--

4

Replace the BCM.

Is the repair complete?

--

Go to Interior Lights Dimming Diagnostic System Check

--