GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1997 🢒 Corvette 🢒 Body and Accessories 🢒 Entertainment 🢒 Remote CD Changer Replacement

Removal Procedure

    Object Number: 171887 Size: SH
  1. Open the rear lift window panel.
  2. Disconnect the electrical/audio connector from the remote compact disc (CD) changer.

    3. Object Number: 65120 Size: SH
  3. Remove the remote CD changer mounting bracket bolts.

    4. Object Number: 65122 Size: SH
  4. Remove the remote CD changer from the mounting brackets.

    5. Important: Reinstall the transportation pin when shipping or transporting the remote CD changer.

  5. If shipping or transporting the remote CD changer, reinstall the transportation pin by inserting into the original position and fixing in place with clear tape.

Installation Procedure

    Object Number: 65122 Size: SH
  1. Remove the transportation pin from the remote CD changer, if installed prior.
  2. Install the remote CD changer to the mounting brackets.

    3. Object Number: 65120 Size: SH
  3. Install the remote CD changer mounting bracket bolts.

    4. Tighten
    Tighten the remote CD changer mounting bracket bolts to 1.9 N·m (17 lb in).

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 171887 Size: SH
  4. Connect the electrical/audio connector to the remote CD changer.
  5. Close the rear lift window panel.