Removal Procedure
- Remove the I/P upper trim pad. Refer to
Instrument Panel Upper Trim Pad Replacement
.
- Remove the DRL and sunload temperature sensor wire retainers from
the windshield defroster duct, if equipped.
- Remove the windshield defroster duct retaining screws.
- Release the windshield defroster duct from the LH and RH side
window lower defogger outlet ducts.
Lift the windshield defroster duct slightly, then use a twisting motion
to release from the side window lower defogger ducts.
- Remove the defroster duct.