GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1997 🢒 Corvette 🢒 Body and Accessories 🢒 Keyless Entry 🢒 Transmitter Battery Replacement

Removal Procedure

    Object Number: 65681 Size: SH
  1. Place the transmitter face down on a clean surface.
  2. Insert a small screwdriver into the slot on the side of the transmitter.
  3. Carefully turn the screwdriver in the slot until the cover releases.
  4. Remove the cover while being careful not to damage the seal.
  5. Remove the battery from the transmitter.

Installation Procedure

    Object Number: 65681 Size: SH
  1. Install the new battery with the positive (+) side facing up.
  2. Inspect that the seal is properly positioned.
  3. Snap the two halves together.
  4. Synchronize the transmitter to the receiver. Refer to Transmitter Programming/Synchronization .