GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1997 🢒 Corvette 🢒 Body and Accessories 🢒 Doors 🢒 Body Lock Pillar Trim Panel Replacement

Removal Procedure

    Object Number: 71211 Size: SH
  1. Remove the sill plate. Refer to Sill Plate

    2. Object Number: 71212 Size: SH
  2. Pull the lock pillar trim panel with retainers from the lock pillar and the side rail.
  3. Slide the lock pillar trim out from under the rear compartment side trim panel.
  4. Separate the trim panel from the seat belt.
  5. Remove the lock pillar trim.

Installation Procedure

    Object Number: 71212 Size: SH
  1. Route the seat belt through the lock pillar trim panel.
  2. Position the lock pillar trim panel under rear compartment side trim panel.
  3. Position the retainers to holes in lock pillar and side rail.
  4. Push in on the panel securing the retainers.

    5. Object Number: 71211 Size: SH
  5. Install the sill plate. Refer to Sill Plate