For 1990-2009 cars only
Removal Procedure
- Disconnect the inside rearview mirror electrical connector.
- Loosen the mirror mount tension screw.
- Slide the mirror up off the mirror bracket.
Installation Procedure
- Slide the rearview mirror down onto the bracket.
- Connect the electrical connector.
- Tighten the mirror tension screw.
Tighten
Tighten the rearview mirror mount tension screw to 1.5 N·m
(13 lb in). Refer to
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
in General Information.