GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1997 🢒 Corvette 🢒 Body and Accessories 🢒 Exterior/Interior Trim 🢒 Body Hinge Pillar Trim Panel Replacement

Removal Procedure

    Object Number: 71211 Size: SH
  1. Remove the fastener attaching the top of the upper trim panel and the windshield side garnish molding to the hinge pillar.
  2. Unsnap the hinge pillar upper trim from the hinge pillar.
  3. Remove the hinge pillar upper trim.
  4. Remove the lower hinge pillar trim if needed. The lower trim is part of the sill plate. Refer to Sill Plate .

Installation Procedure

    Object Number: 71211 Size: SH
  1. Snap the hinge pillar trim to the hinge pillar.
  2. Install the fastener attaching the top of the trim.
  3. Install the lower trim panel (sill plate) if removed. Refer to Sill Plate .