|
|---|
| (1) | Electronic Column Lock |
| (2) | Windshield Wiper Switch |
| (3) | Anti Rotation Pin |
| (4) | Tilt Head Assembly |
| (5) | Inner Race |
| (6) | Inner Race Seat |
| (7) | Upper Bearing Inner Race
Spring |
| (8) | T/S Cancel Cam and Horn Tower |
| (9) | Shaft Lock Shield |
| (10) | Wave Washer |
| (11) | SIR Coil Assembly |
| (12) | Retaining Ring |
| (13) | Flanged Prevailing Torque
Nut |
| (14) | Steering Column Upper Shroud |
| (15) | Lower Steering Column Shaft |
| (16) | Steering Column Shaft Assembly |
| (17) | Centering Sphere |
| (18) | Joint
Preload Spring |
| (19) | Centering Sphere |
| (20) | Race and Upper Shaft Assembly |
| (21) | Torx Head Screw |
| (22) | Steering Column
Lower Shroud |
| (23) | T/S and Multifunction Switch |
| (24) | Sensor Retainer |
| (25) | Steering Wheel Position Sensor |
| (26) | Bearing Assembly
Adapter |
| (27) | Steering Column Jacket Assembly |
| (28) | Pivot Pin |
| (29) | Tilt Bumper |
| (30) | Support Screws |
| (31) | Steering Column Support Housing |
| (32) | Tilt Spring |
| (33) | Spring Guide |
The steering column includes
important features in addition to the steering function:
Use only the specified screws/bolts and nuts and tighten them to their
specified torque to ensure the energy absorbing action of the column assembly.
Apply a thin coat of lithium grease to all friction points during assembly.
Handle the removed column assembly with special care. The following
could shear or loosen the plastic fastener that keeps the column assembly
rigid:
