Clutch Rotor and Bearing Removal V7 - Direct Mount

Tools Required

1. Remove the A/C compressor from the vehicle.
2. Clamp the A/C compressor holding fixture, J 41790-A in a vise and attach the A/C compressor to the J 41790-A .



3. Remove the clutch plate and hub assembly. Refer to A/C compressor Clutch Plate and Hub Assembly Removal (V7 - Direct Mount) .
4. Using external snap ring pliers (1), remove the clutch rotor and bearing assembly retaining ring (3).



5. Place the J 33023-A on the clutch rotor.



6. Install the J 41552 down into the inner circle of slots in the rotor.

Turn the J 41552 clockwise in the slots to engage the puller tangs with the rotor.

7. Hold the J 41552 in place and use a wrench to turn the center forcing screw against the J 33023-A to remove the clutch rotor and bearing assembly.