Activate the turn signal switch so that the RH turn signal lamp is ON.

Do both the front and rear RH exterior turn signal lamps illuminate?

--

Go to Step 2

Go to Exterior Lights Diagnostic System Check

1. Disconnect the instrument cluster connector.
2. Connect a test light between terminal A16 of the instrument cluster connector and ground.
3. Activate the turn signal switch so that the RH turn signal lamp is ON.

Does the test light pulse ON and OFF?

--

Go to Step 4

Go to Step 3

Locate and repair an open or high resistance in CKT 15 between the instrument cluster connector and the instrument panel electrical center connector C2.

Is the repair complete?

--

Go to Exterior Lights Diagnostic System Check

--

Check the instrument panel cluster connector and RH turn signal indicator bulb for an open circuit.

Is the instrument panel cluster connector and RH turn signal indicator bulb in normal condition?

--

Go to Step 5

Go to Step 6

Replace the instrument cluster.

Is the repair complete?

--

Go to Exterior Lights Diagnostic System Check

--

Repair the instrument panel cluster connector or replace the RH turn signal indicator bulb.

Is the repair complete?

--

Go to Exterior Lights Diagnostic System Check

--