Fasten Safety Belt Indicator/Chime Inoperative. Chevrolet Corvette 1998

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 1998 🢒 Corvette 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Fasten Safety Belt Indicator/Chime Inoperative

Seatbelt Indicator Inoperative

Step	Action	Value(s)	Yes	No
1	Disconnect the seatbelt switch connector. Connect a DMM between terminal B of the seatbelt switch connector and ground. Measure CKT 150 for continuity to ground. Is the resistance to ground less than the specified value?	0.5ohms	Go to Step 3	Go to Step 2
2	Locate and repair an open or a high resistance in CKT 150. Is the repair complete?	--	Recheck Seat Belt Warning Operation	--
3	Connect a fused jumper between terminals A and B of the seatbelt switch connector. Turn the ignition switch to the ON position. Does the Seatbelt Warning Indicator illuminate?	--	Go to Step 4	Go to Step 5
4	Replace the seatbelt switch. Is the repair complete?	--	Recheck Seat Belt Warning Operation	--
5	Disconnect the instrument cluster connector. Connect a DMM between terminal A of the seatbelt switch connector and terminal B2 of the instrument cluster connector. Measure CKT 238 for continuity between terminal A of the seatbelt switch connector and terminal B2 of the instrument cluster connector. Is the resistance between these two connectors less than the specified value?	0.5ohms	Go to Step 7	Go to Step 6
6	Locate and repair an open or high resistance in CKT 238. Is the repair complete?	--	Recheck Seat Belt Warning Operation	--
7	Check the instrument panel cluster connector and seat belt warning indicator bulb for an open circuit. Is the instrument panel cluster connector and seat belt warning indicator bulb in normal condition?	--	Go to Step 9	Go to Step 8
8	Repair the instrument panel cluster connector or replace the seat belt warning indicator bulb. Is the repair complete?	--	Recheck Seat Belt Warning Operation	--
9	Replace the instrument cluster. Is the repair complete?	--	Recheck Seat Belt Warning Operation	--