Removal Procedure
- Remove the seatback recliner
handle.
| 1.1. | With a suitable blunt ended tool inserted between the cushion
and the handle push the handle retaining spring clip down. |
| 1.2. | Pull the handle from the shaft. |
- Remove the screws attaching
the seat side trim panel.
- Push in on the side of
the seat cushion and visually determine if the trim is: first design (no upper
attaching push-in barrel post) or second design (has upper push-in attaching
barrel post).
| • | With the push-in barrel post (2) (second design). |
| • | Rock the panel side to side working the barrel post clip (1) out of
the seat frame. |
| • | With out the push-in barrel (first design). |
| • | Reposition panel away from the seat. |
- Disconnect the switch
harness.
- Remove the switch.
Installation Procedure
- Install the switch to
the side trim panel.
- Install a new barrel clip
(1) to the trim panel upper barrel post (2 (second design).
- Connect the switch harness.
- Install the seat side
trim panel.
| • | Push the barrel post with clip through the hole in the seat cover
and into the seat frame (second design). |
| • | Install the front and rear trim panel attaching screws. |
- Install the seatback
recliner handle.
| 5.1. | Position the handle retaining spring clip into the lock position. |
| 5.2. | Snap the handle onto the reclining mechanism shaft. |
