Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: The folding top (convertible) storage compartment lid release switch does not release the compartment lid when activated by the release switch. | ||||
1 | Were you sent here from the Folding Top Compartment Lid Release System Check? | -- | Go to Folding Top Compartment Lid Release System Check | |
2 |
Is CKT 150 continuous to ground? | -- | ||
3 | Repair the open in CKT 150. Is the repair complete? | -- | Go to Folding Top Compartment Lid Release System Check | -- |
4 |
Does the folding top storage lid open? | -- | ||
5 | Replace the folding top storage lid release switch. Is the repair complete? | -- | Go to Folding Top Compartment Lid Release System Check | -- |
6 |
Is CKT 2166 continuous between these two connectors? | -- | ||
7 | Repair the open in CKT 2166. Is the repair complete? | -- | Go to Folding Top Compartment Lid Release System Check | -- |
8 |
With the fused jumper connected, does the folding top storage lid open? | -- | ||
9 | Replace the Body Control Module (BCM) and program as needed. Is the repair complete? | -- | Go to Folding Top Compartment Lid Release System Check | -- |
10 |
Is CKT 2169 continuous between these two terminals? | -- | ||
11 | Repair the open in CKT 2169. Is the repair complete? | -- | Go to Folding Top Compartment Lid Release System Check | -- |
12 | Connect a fused jumper wire between the BATT CKT terminal and the CKT 901 terminal inside the instrument panel electrical center which is used for the TONN REL Micro Relay #41. With the fused jumper connected, does the folding top storage lid open? | -- | ||
13 | Replace the TONN REL Micro Relay #41. Is the repair complete? | -- | Go to Folding Top Compartment Lid Release System Check | -- |
14 | Check the TONN REL MiniFuse® #17 for an open circuit. Is the fuse open? | -- | ||
15 |
Does the TONN REL MiniFuse® #17 immediately open when installed? | -- | ||
16 | Repair a short to ground in CKT 901. Is the repair complete? | -- | Go to Folding Top Compartment Lid Release System Check | -- |
17 |
Does the TONN REL MiniFuse® #17 immediately open when the fused jumper wire is reinstalled? | -- | ||
18 | Replace the folding top storage lid latch/motor. Is the repair complete? | -- | Go to Folding Top Compartment Lid Release System Check | -- |
19 | Carefully inspect the folding top storage lid latch/motor mechanisms for binding and repair. Is the repair complete? | -- | Go to Folding Top Compartment Lid Release System Check | -- |
20 |
Is CKT 150 continuous to G302? | -- | ||
21 | Repair the open in CKT 150 between the folding top storage lid latch/motor connector and G302. Is the repair complete? | -- | Go to Folding Top Compartment Lid Release System Check | -- |
