Generator Bracket Replacement for Chevrolet Corvette 1999

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Remove the generator. Refer to Generator Replacement .



2. Remove the power steering pump. Refer to Power Steering Pump Replacement in Power Steering.
3. Remove the generator bracket bolts.
4. Remove the generator bracket from the cylinder head.

1. Install the generator bracket to the cylinder head.

Tighten
Tighten the generator bracket bolts to 50 N·m (37 lb ft).

2. Install the power steering pump. Refer to Power Steering Pump Replacement in Power Steering.
3. Install the generator. Refer to Generator Replacement .