Tools Required

1. Remove the reverse idler shaft bracket bolts.
2. Remove the bracket.



3. Remove the following parts in order:

3.1.	The reverse idler gear

3.2.	The roller bearing

3.3.	The reverse idler shaft




4. Remove the following parts in order:

4.1.	The countershaft extension bearing race

4.2.

The shim

4.3.	The funnel

4.4.	Remove the outer and inner output shaft seals (pry out the seals with a suitable tool).




5. Remove the mainshaft bearing race retainer ring.

Important: Do not replace the bearing race unless inspection shows bearing race damage.

6. Remove the mainshaft bearing race using the J 26941 and the J 23907 .