GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2003
🢒
Corvette
🢒
Engine
🢒
Engine Cooling
🢒 Engine Coolant Fan Shroud Replacement
Tools Required
J 38185
Hose Clamp Pliers
Removal Procedure
Drain the cooling system. Refer to
Cooling System Draining and Filling
.
Remove the radiator support. Refer to
Radiator Support Replacement
.
Reposition the radiator inlet hose clamp from the radiator using
J 38185
.
Remove the radiator inlet hose from the radiator.
Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
Disconnect the cooling fan electrical connectors.
Remove the forward lamp harness from the retaining clips on the shroud.
Reposition the radiator outlet hose clamp from the radiator using
J 38185
.
Remove the radiator outlet hose from the radiator.
Lower the vehicle.
Remove fan shroud.
Installation Procedure
Install the fan shroud.
Raise the vehicle.
Install the radiator outlet hose to the radiator.
Reposition the radiator outlet hose clamp to the radiator using
J 38185
.
Install the forward lamp harness to the retaining clips on the fan shroud.
Connect the cooling fan electrical connectors.
Lower the vehicle.
Install the radiator inlet hose to the radiator.
Reposition the radiator inlet hose clamp to the radiator using
J 38185
.
Install the radiator support. Refer to
Radiator Support Replacement
.
Fill the cooling system. Refer to
Cooling System Draining and Filling
.