GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Corvette 🢒 Engine 🢒 Engine Electrical 🢒 Engine Mount Replacement - Left Side

Removal Procedure

    Object Number: 651864 Size: SH
  1. Remove the front suspension crossmember. Refer to Front Suspension Crossmember Replacement in Front Suspension.
  2. Remove the engine mount-to-engine mount bracket nut.
  3. Remove the engine mount.
  4. Remove the engine mount heat shield from the engine mount, if necessary.

Installation Procedure

    Object Number: 651864 Size: SH
  1. Install the engine mount heat shield to the engine mount, if necessary.
  2. Install the engine mount.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the engine mount-to-engine mount bracket nut.

    4. Tighten
    Tighten the nut to 65 N·m (48 lb ft).

  4. Install the front suspension crossmember. Refer to Front Suspension Crossmember Replacement in Front Suspension.