GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 675295  Size: SH
  1. Remove the push-in retainer attaching the air inlet screen and battery heat shield to the plenum panel.

  2. Object Number: 675299  Size: SH
  3. Remove the push-in retainer attaching the battery heat shield to the wheelhouse panel.
  4. Lift the battery heat shield from the ground stud and remove the shield.

Installation Procedure


    Object Number: 675295  Size: SH
  1. Position the heat shield with the rearward edge between the retention fingers.
  2. Position the shield onto the ground stud.
  3. Install the push-in retainer attaching the heat shield to the wheelhouse panel.

  4. Object Number: 675299  Size: SH
  5. Install the push-in retainer attaching the air inlet screen and the battery heat shield to the plenum panel.