GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Corvette 🢒 Engine 🢒 Engine Controls - 5.7L 🢒 Fuel Tank Filler Hose Replacement

Removal Procedure

    Object Number: 562230 Size: SH
  1. Remove the left fuel tank. Refer to Fuel Tank Replacement .
  2. Remove the fuel fill hose (1) from the fuel tank.
  3. Cap the open end of the fuel tank.

Installation Procedure

    Object Number: 562230 Size: SH
  1. Uncap the opening on the fuel tank.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the fuel fill hose (1) to the fuel tank.

    3. Tighten
    Tighten the fuel fill hose clamp to 4 N·m (35 lb in).

  3. Install the left fuel tank. Refer to Fuel Tank Replacement .