GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Corvette 🢒 HVAC 🢒 Heating, Ventilation and Air Conditioning 🢒 Floor Rear Air Outlet Duct Replacement - Right Side

Removal Procedure
  1. Remove the I/P upper trim pad. Refer to Instrument Panel Upper Trim Pad Replacement in Instrument Panel, Gages and Console.
  2. Pull the front floor carpet away from the RH side of the driveline tunnel to access the floor air outlet - inner.

    3. Object Number: 297307 Size: SH
  3. Release the floor air outlet - inner from the floor air outlet lower duct - RH rear.

    4. Use a twisting motion to release the floor outlet from the floor duct.

  4. Release the floor air outlet lower duct - RH rear from the floor air outlet duct - RH rear, then remove the duct.

    5. Use a twisting motion to release the lower duct from the duct.


    Object Number: 95654 Size: SH
  5. Using a flat bladed screwdriver, CAREFULLY release the floor air outlet duct - RH rear from the HVAC module.
  6. Lower the duct down between the I/P center support bracket and the side of the driveline tunnel, then remove the duct.

Installation Procedure

    Object Number: 95654 Size: SH
  1. Insert the floor air outlet duct - RH rear up between the I/P center support bracket and the side of the driveline tunnel, then position the duct to the HVAC module.
  2. Align the floor duct to the HVAC module, then push firmly and evenly to secure the duct.

    3. Object Number: 297307 Size: SH
  3. Position and secure the floor air outlet lower duct - RH rear to the floor air outlet duct - RH rear.

    4. Use a twisting motion to secure the lower duct to the duct.

  4. Secure the floor air outlet - inner to the floor air outlet lower duct - RH rear.

    5. Use a twisting motion to secure the floor outlet to the floor duct.

  5. Position the front floor carpet to the RH side of the driveline tunnel.
  6. Install the I/P upper trim pad. Refer to Instrument Panel Upper Trim Pad Replacement in Instrument Panel, Gages and Console.