Compressor Clutch Plate and Hub Assembly Removal V7 - Direct Mount

Tools Required

1. Remove the A/C compressor from the vehicle.
2. Clamp the A/C compressor holding fixture, J 41790-A in a vise and attach the A/C compressor to the J 41790-A .



3. Hold the clutch hub and drive plate assembly (2) in place using the J 33027-A .
4. Remove the A/C compressor shaft nut with a 13 mm socket (1).



5. Thread the J 33013-B into the hub.
6. Remove the hub and drive plate assembly (1) by turning the center screw into the body of the J 33013-B and against the A/C compressor shaft.
7. Remove the shaft key and retain for reassembly.