GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Corvette 🢒 Restraints 🢒 SIR 🢒 Instrument Panel Insulator Panel Replacement - Left Side

Removal Procedure

    Object Number: 64671 Size: SH
  1. Using a flat bladed tool, carefully pry the I/P courtesy lamp assembly from the LH lower closeout panel.

    2. Object Number: 95689 Size: SH
  2. Remove the push-on retaining nut from the steering column bracket stud.
  3. Release the LH lower closeout panel push-in retainers from the I/P lower support beam.
  4. Insert the I/P courtesy lamp assembly up through the opening in the closeout panel.
  5. Lower and remove the closeout panel.

    6. Release the notch in the RH forward edge of the closeout panel from the tab on the accelerator pedal bracket.

Installation Procedure

    Object Number: 95689 Size: SH
  1. Insert the I/P courtesy lamp down through the opening in the closeout panel.
  2. Install the closeout panel into position.
  3. Secure the closeout panel push-in retainers to the I/P lower support beam.
  4. Secure the notch in the RH forward edge of the closeout panel to the tab on the accelerator pedal bracket.

    5. Align, then push up to secure.

  5. Install the push-on retaining nut to the steering column bracket stud.

    6. Object Number: 64671 Size: SH
  6. Align the I/P courtesy lamp to the closeout panel opening, then push to secure.