Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Interior Lights Schematics Connector End View Reference: Master Electrical Component List | |||
1 | Did you perform the Lighting Systems Diagnostic Systems Check? | Go to Step 2 | |
2 | Turn ON the rearview mirror reading lamps. Do the lamps illuminate? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Does the I/P compartment lamp, underhood lamp, and vanity mirror lamp operate normally? | Go to Step 4 | |
4 |
Does the test lamp illuminate? | Go to Step 5 | Go to Step 6 |
5 | Connect a test lamp between the switched battery positive voltage feed circuit of the inside rearview mirror reading lamp and the ground circuit. Does the test lamp illuminate? | Go to Step 8 | Go to Step 7 |
6 | Repair the poor connection or the open in the switched battery positive voltage feed circuit of the inside rearview mirror reading lamp. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 9 | -- |
7 | Repair the poor connection or the open in the ground circuit of the inside rearview mirror reading lamp. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 9 | -- |
8 | Replace the inside rearview mirror. Refer to Inside Rearview Mirror Replacement . Did you complete the replacement? | Go to Step 9 | -- |
9 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
