GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 190922  Size: SH
  1. Remove the headlamp opening door. Refer to Headlamp Opening Door Replacement .
  2. Mark the location of the headlamp intermediate bracket.
  3. Remove the headlamp intermediate bracket retaining screws.
  4. Remove the headlamp intermediate bracket from the headlamp.

Installation Procedure


    Object Number: 190922  Size: SH
  1. Position the headlamp intermediate bracket to the position as marked prior to removal.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the headlamp intermediate bracket retaining screws.
  4. Tighten
    Tighten the headlamp intermediate bracket screws to 2 N·m (18 lb in).

  5. Install the headlamp opening door. Refer to Headlamp Opening Door Replacement .