Removal Procedure
- Turn the ignition switch to the ACCY position.
- Turn the wiper switch to the DELAY position.
- Turn the ignition OFF when the wipers are in the innerwipe position
and not moving.
- Press the wiper blade release button
in and remove the wiper blade from the inside radius of the wiper arm.
- Remove the wiper arm out through the
opening in the wiper blade.
Installation Procedure
- Install the hook of the wiper arm through
the opening in the wiper blade.
- Position the wiper blade pivot into the
inside radius of the wiper arm hook.
- Press the wiper blade pivot into the wiper arm hook until the
pivot locks into the wiper arm.
- Inspect the wipers for proper operation.