Step | Action | Values | Yes | No |
|---|---|---|---|---|
Schematic Reference: Instrument Cluster Schematics | ||||
1 | Did you perform the IPC Diagnostic System Check? | -- | Go to Step 2 | |
2 | With a scan tool, observe the Oil Temp parameter in the IPC data 1 list. Does the scan tool indicate the correct oil temperature? | -- | Go to Step 3 | Go to Step 4 |
3 | With a scan tool, observe the Oil Temp parameter in the IPC data 1 list and the oil temperature gage display on the DIC. Does the scan tool display correspond with the oil temperature gage display within the specified value? | 10°C (14°F) | System OK | Go to Step 5 |
4 | Replace the oil temperature sensor. Refer to Engine Oil Temperature Gage Sensor Replacement . Did you complete the replacement? | -- | Go to Step 6 | -- |
5 | Replace the IPC. Refer to Instrument Cluster Replacement . Did you complete the replacement? | -- | Go to Step 6 | -- |
6 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
