GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Corvette 🢒 Body and Accessories 🢒 Cruise Control 🢒 Clutch Pedal Cruise Control Release Switch Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 71493 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the LH instrument panel (I/P) lower insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages, and Console.
  3. Disconnect the clutch cruise control release switch electrical connector.

    4. Object Number: 71495 Size: SH
  4. Remove the clutch cruise control release switch from the bracket.

Installation Procedure

    Object Number: 71495 Size: SH
  1. Install the clutch cruise control release switch to the bracket.
  2. Fully seat the switch to the bracket.

    3. Audible clicks will be heard while pushing the switch.


    Object Number: 71493 Size: SH
  3. Connect the clutch cruise control release switch electrical connector.

    4. Object Number: 73242 Size: SH
  4. Adjust the clutch cruise control release switch.
  5. Grasp the clutch pedal and pull fully rearward against the pedal stop.

    6. Audible clicks may be heard as the switch moves into the adjusted position.

  6. Install the LH I/P lower insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages, and Console.

    7. Notice: Refer to Fastener Notice in the Preface section.

  7. Connect the negative battery cable.

    8. Tighten
    Tighten the negative battery cable bolt to 15 N·m (11 lb ft).