GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Corvette 🢒 Body and Accessories 🢒 Bumpers 🢒 Front Bumper Fascia Bracket Replacement

Removal Procedure
  1. Remove the front fascia. Refer to Front Bumper Fascia Replacement .

    2. Object Number: 63707 Size: SH
  2. Remove the front fascia retainer bolts.
  3. Remove the front fascia retainer.

    4. Object Number: 63710 Size: SH
  4. Remove the front fascia bracket bolts.
  5. Remove the front fascia bracket.

Installation Procedure

    Object Number: 63710 Size: SH
  1. Position the front bumper fascia bracket to the impact bar.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the front fascia bracket to impact bar bolts.

    3. Tighten
    Tighten the front fascia bracket bolts to 7 N·m (62 lb in).

  3. Position the front fascia retainer to the front fascia bracket.

    4. Object Number: 63707 Size: SH
  4. Install the front fascia retainer to fascia bracket bolts.

    5. Tighten
    Tighten the front fascia retainer bolts to 7 N·m (62 lb in).

  5. Install the front fascia. Refer to Front Bumper Fascia Replacement .