Scan Tool Output Controls. Chevrolet Corvette 2003

GM Service Manual Online

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2003 🢒 Corvette 🢒 Body and Accessories 🢒 Doors 🢒 Scan Tool Output Controls

Table 1:	Driver Door Module
Table 2:	Passenger Door Module

Driver Door Module

Scan Tool Output Control	Additional Menu Selection(s)	Description
Door Switch Pad Illum	Door Backlight Test	The DDM commands the driver door switch backlighting to illuminate for approximately 5 seconds when you select On. The driver door switch backlighting should illuminate.
Driver Lock	Door Lock Test	The DDM actuates the driver door lock actuator for approximately 5 seconds when you select Lock or Unlock. The driver door lock actuator should Lock or Unlock.
Driver Window	Door Window Test	The DDM commands the driver door window to run to the full up or full down position when Up or Down is selected. The driver door window should run full Up or full Down.
Memory 1 Indicator	Mirror Test	The DDM commands the Memory 1 select LED to illuminate for approximately 5 seconds when you select On. The Memory 2 select LED should illuminate.
Memory 2 Indicator	Mirror Test	The DDM commands the Memory 2 select LED to illuminate for approximately 5 seconds when you select On. The Memory 2 select LED should illuminate.
Mirror Down	Mirror Test	The DDM commands the driver mirror to rotate down for approximately 5 seconds when you select On. The driver mirror should move in the down direction.
Mirror Heater	Mirror Test	The DDM commands the driver mirror to heat for approximately 5 seconds when you select On. The driver mirror should heat.
Mirror Left	Mirror Test	The DDM commands the driver mirror to rotate left for approximately 5 seconds when you select On. The driver mirror should move in the left direction.
Mirror Right	Mirror Test	The DDM commands the driver mirror to rotate right for approximately 5 seconds when you select On. The driver mirror should move in the right direction.
Mirror Up	Mirror Test	The DDM commands the driver mirror to rotate up for approximately 5 seconds when you select On. The driver mirror should move in the up direction.
Passenger Mirror Select LED	Mirror Test	The DDM commands the passenger mirror select LED to illuminate for approximately 5 seconds when you select On. The passenger mirror select LED should illuminate.

Passenger Door Module

Scan Tool Output Control	Additional Menu Selection(s)	Description
Door Switch Pad Illum	Door Backlight Test	The PDM commands the passenger door switch backlighting to illuminate for approximately 5 seconds when you select On. The passenger door switch backlighting should illuminate.
Mirror Down	Mirror Test	The PDM commands the passenger mirror to rotate down for approximately 5 seconds when you select On. The passenger mirror should move in the down direction.
Mirror Heater	Mirror Test	The PDM commands the passenger mirror to heat for approximately 5 seconds when you select On. The passenger mirror should heat.
Mirror Left	Mirror Test	The PDM commands the passenger mirror to rotate left for approximately 5 seconds when you select On. The passenger mirror should move in the left direction.
Mirror Right	Mirror Test	The PDM commands the passenger mirror to rotate right for approximately 5 seconds when you select On. The passenger mirror should move in the right direction.
Mirror Up	Mirror Test	The PDM commands the passenger mirror to rotate up for approximately 5 seconds when you select On. The passenger mirror should move in the up direction.
Passenger Lock	Door Lock Test	The PDM actuates the passenger door lock actuator for approximately 5 seconds when you select Lock or Unlock. The passenger door lock actuator should Lock or Unlock.
Passenger Window	Door Window Test	The PDM commands the passenger door window to run to the full up or full down position when Up or Down is selected. The passenger door window should run full Up or full Down.