GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Corvette 🢒 Body and Accessories 🢒 Roof 🢒 Folding Top Seal Compression Panel Replacement

Removal Procedure

    Object Number: 214117 Size: SH
  1. Remove the screws from the front side rail seal on the #1 bow.

    2. Object Number: 777786 Size: SH
  2. Remove the screws from the seal compression panel on the #1 bow.

    3. Object Number: 777792 Size: SH
  3. Remove the panel.

Installation Procedure

    Object Number: 777792 Size: SH
  1. Position the seal compression panel to the #1 bow.

    2. Object Number: 777786 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screws to the seal compression panel on the #1 bow.

    3. Tighten
    Tighten the screws to 3  N·m (26 lb in).


    Object Number: 214117 Size: SH
  3. Install the screw to the front side rail seal on the #1 bow.

    4. Tighten
    Tighten the screw to 2  N·m(18 lb in).