GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Corvette 🢒 Body and Accessories 🢒 Interior Trim 🢒 Folding Top Stowage Compartment Lid Extension

Removal Procedure

    Object Number: 214013 Size: SH
  1. Open the folding top stowage compartment lid.
  2. Remove the screws attaching the lower sides of the extension panel.
  3. Remove the screws attaching the top of the extension panel.
  4. Remove the panel upward from the bracket.

Installation Procedure

    Object Number: 214013 Size: SH
  1. Position the extension panel to the bracket with the latch manual release cable extending out from under the panel.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolts attaching the extension panel to the bracket.

    3. Tighten
    Tighten the extension panel bolts to 4 N·m (35 lb in).

  3. Closed the folding top stowage compartment lid.