GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 64665  Size: SH
  1. Remove the screws retaining the tail lamp assembly to the rear fascia.
  2. Remove the tail lamp from the fascia to gain access to the tail lamp socket.
  3. Remove the socket from the lamp assembly.
  4. Remove the bulb from the socket, if replacing the bulb.
  5. Remove the tail lamp from the vehicle.

Installation Procedure


    Object Number: 64665  Size: SH
  1. Install the bulb to the tail lamp socket, if replacing the bulb.
  2. Install the socket to the tail lamp assembly.
  3. Position the tail lamp assembly to the rear fascia.
  4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install the screws retaining the taillamp to the rear fascia.
  6. Tighten
    Tighten the tail lamp retaining screws to 2 N·m (18 lb in).