The hydraulic clutch linkage in your vehicle is self-adjusting. The master cylinder reservoir is filled with hydraulic fluid.
It is not necessary to regularly check the fluid unless you suspect there is a leak in the system. Adding fluid won't correct a leak.
A fluid loss in this system could indicate a problem. Have the system inspected and repaired.
When to Check and What to Use
The clutch master cylinder reservoir is located at the rear of the engine compartment on the driver's side. See Engine Compartment Overview for more information on location.
Refer to the Maintenance Schedule to determine how often you should check the fluid level in your master cylinder reservoir and for the proper fluid. See Part B: Owner Checks and Services and Part D: Recommended Fluids and Lubricants .
How to Check and Add Fluid
Fluid should be added if the fluid level is below the step on the inside of the reservoir. There are additional instructions on the reservoir cap. Put the rubber seal and cap back on. See Engine Compartment Overview for more information on location.
