Caution: If a roof panel is not stored properly, it could be thrown about the vehicle
in a crash or sudden maneuver. People in the vehicle could be injured. Whenever you
store a roof panel in the vehicle, always be sure that it is stored securely in the
proper location.
Notice: If you drop or rest a roof panel on its edges,
the roof panel, paint and/or weatherstripping may be damaged. Always place the roof
panel in the stowage receivers after removing it from the vehicle.
- Turn the roof panel so that the front edge of the panel is facing the
storage area. The locating pins, (at the rear of the panel), should point toward the
egg-shaped stowage receivers on the floor of the center compartment.
- Push the panel forward until the pins bottom out in the receivers.
- There are two spring-loaded pins on the rear wall of the storage compartment.
These storage pins go into the slots on each side of the roof panel.
- Gently lower the roof panel onto the carpeted ledge. Then pull each release
rearward and upward to place the storage pins into the holes of the roof panel.
- Gently lift and lower the roof panel to be sure it is locked into place.