Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Rear Compartment Lid Replacement

1

Bolt, Compartment Lid (Qty: 4)

Tighten
31 N·m (23 lb ft)

2

Lid, Rear Compartment

Tip

Rear Compartment Strut Replacement

3

Strut, Rear Compartment Lid

Caution:  When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Notice: Apply pressure only at the end of the liftgate/hood assist rod that you are removing or attaching. Do NOT apply pressure to the middle of the rod because damage or bending will result.

Tip
Remove the metal clip at the ends of the assist rod, then pull away from stud.

4

Stud, Strut (Qty: 2)

Tighten
9 N·m (80 lb in)

Rear Compartment Lid Hinge Replacement

5

Bolt, Compartment Lid Hinge (Qty: 2)

Tighten
25 N·m (18 lb ft)

6

Hinge, Rear Compartment Hinge

Tip
Adjust as necessary.