Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Remove the number # 1 Bow weatherstrip and retainer. Refer to Folding Top Weatherstrip, Retainer Replacement .
2. Release and fold back the folding top cover from the  # 1 Bow. Refer to Folding Top Cover Replacement .
3. Remove the front section of the headliner. Refer to Folding Top Headlining Trim Panel Replacement .

Leaving the two outward most screws intact, remove the inboard headliner retaining bracket screws and fold back the headliner.

1

Folding Top Front Locating Pin Guide Screws (Qty: 2)

Tighten
9 N·m (80 lb in)

2

Folding Top Front Latch Actuator

Tip
It will be necessary to loosen the front latch actuator to remove the front guide.

3

Folding Top Front Locating Pin Guide