GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Corvette 🢒 Body 🢒 Seats 🢒 Front Seat Heater Control Module Replacement

Removal Procedure

    Object Number: 71215 Size: SH
  1. Remove the seat. Refer to Driver and Passenger Seat Replacement .

    2. Object Number: 281999 Size: SH
  2. Remove the plastic fasteners securing the heated seat control module to the seat cushion foam support wires.
  3. Disconnect the harness connectors.
  4. Remove the heated seat control module from the seat.

Installation Procedure

    Object Number: 281999 Size: SH
  1. Position the heated seat module to the seat cushion foam support wires.
  2. Secure the heated seat module to the seat cushion foam support wires with tie straps.
  3. Connect harness connectors to the memory seat control module.

    4. Object Number: 71215 Size: SH
  4. Install the seat. Refer to Driver and Passenger Seat Replacement .
  5. Reprogram the Heated Seat Module. Refer to Heated Seat Control Module Programming and Setup in Programming and Setup.
  6. Refer to Control Module References for programming and setup information.