Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Fascia Assembly, Front Bumper

Refer to Fascia, Valence, Fascia Close Out Panel Replacement - Front Bumper .

2

Screw, Headlamp Washer Nozzle

Tighten
2 N·m (18 lb in)

3

Cover, Headlamp Washer Cover

4

Hose Assembly, Headlamp Washer

5

Nozzle Assembly, Headlamp Washer

Tip

1. Squeeze the locking tabs on the headlamp washer nozzle assembly together to remove and replace from the fascia.
2. Pull the nozzle shaft out and lock in place with the washer nozzle locking tabs.