GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Corvette 🢒 Body 🢒 Wiring Systems 🢒 Clutch Pedal Cruise Control Release Switch Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 2033355 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the LH instrument panel (I/P) lower insulator panel. Refer to Instrument Panel Insulator Panel Replacement in Instrument Panel, Gages, and Console.
  3. Disconnect the clutch pedal cruise control release switch electrical connector (1).

    4. Object Number: 2033356 Size: SH
  4. Remove the clutch pedal cruise control release switch (1) from the bracket.

Installation Procedure

    Object Number: 2033356 Size: SH
  1. Install the clutch pedal cruise control release switch (1) to the bracket.
  2. Fully seat the switch in the bracket.

    3. Audible clicks will be heard while pushing the switch inward.


    Object Number: 2033355 Size: SH
  3. Rotate the threaded switch to adjust it to the closed position when the clutch pedal is fully released.
  4. Connect the clutch pedal cruise control release switch electrical connector (1).
  5. Secure the clutch pedal cruise control release switch wiring harness to a surrounding wiring harness.

    6. Ensure that operation of the clutch pedal does not contact the clutch pedal cruise control release switch wiring harness or cause the switch to rotate.

  6. Install the LH I/P lower insulator panel. Refer to Instrument Panel Insulator Panel Replacement in Instrument Panel, Gages, and Console.

    7. Notice: Refer to Fastener Notice in the Preface section.

  7. Connect the negative battery cable.

    8. Tighten
    Tighten the negative battery cable bolt to 15 N·m (11 lb ft).