GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Corvette 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Front Cable Replacement

Removal Procedure

    Object Number: 99268 Size: SH
  1. Remove the park brake lever. Refer to Parking Brake Lever Replacement .
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Remove the RH muffler. Refer to Exhaust Muffler Replacement - Right Side .
  4. Disconnect the rear park brake cables from the equalizer.
  5. Disconnect the front park brake cable from the cable retainer.

    6. Object Number: 63997 Size: SH
  6. Remove the front park brake cable bracket from the tunnel.
  7. Lower the vehicle.
  8. Remove the front cable from the vehicle.
  9. Remove the pass-through grommet and front bracket from the cable.

Installation Procedure

    Object Number: 63997 Size: SH
  1. Install the front bracket and pass-through grommet to the cable.
  2. Install the front park brake cable to the vehicle. Insure the pass-through grommet is properly installed.
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  4. Install the front park brake cable bracket to the tunnel.

    5. Object Number: 99268 Size: SH
  5. Connect the front park brake cable to the park brake cable retainer.
  6. Connect the rear park brake cables to the equalizer.
  7. Install the RH muffler. Refer to Exhaust Muffler Replacement - Right Side .
  8. Lower the vehicle.
  9. Install the park brake lever. Refer to Parking Brake Lever Replacement .