For 1990-2009 cars only
Special Tools
| • | J 28585 Universal Snap Ring Remover for the 5/8 inch Line |
| • | J 41623-B 3/8 inch Line Quick Release Tool |
Removal Procedure
- Remove the plastic caps from the quick connect fittings by pulling the caps back along the pipe before installation.
- Install the J 41623-B onto the transmission oil cooler (TOC) pipe, or use the J 28585
- Slide the J 41623-B toward the TOC pipe fitting, or use the J 28585
- Connect the J 41623-B onto the TOC pipe fitting.
- Rotate the J 41623-B or use the J 28585 until the retainer clip (1) rises above the fitting retainer seat.
- Pull back on the TOC pipe to disengage the pipe from the TOC pipe fitting.
- Remove the J 41623-B or the J 28585 from the TOC pipe.
Note: Rotate the J 41623-B to engage the TOC pipe fitting's retainer slots.
The J 41623-B should be nearly flush with the fitting.
Installation Procedure
- Install the TOC pipe into the TOC pipe fitting.
- To ensure the cooler line is properly installed, give the cooler pipe a gentle pull.
Note: Discard the TOC retaining clip and install a new retaining clip.
A distinct snap should be heard or felt when assembling the TOC pipe to the fitting.
