GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Corvette 🢒 Preface 🢒 Cautions and Notices 🢒 Headlamp, Fog Lamp, Turn Signal Lamp, Side Marker Lamp Replacement - Front

Object Number: 1631037 Size: MF

Callout

Component Name

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Headlamp Lamp Assembly Replacement

Preliminary Procedure

Remove front fascia. Refer to Fascia, Valence, Fascia Close Out Panel Replacement - Front Bumper

1

Front Fender Screws (Qty: 6)

Tighten
10 N·m (89 lb in)

2

Headlight Assembly Nuts (Qty: 3)

Tighten
6 N·m (53 lb in)

3

Headlamp Assembly

Caution: Refer to Halogen Bulb Caution in the Preface section.

Tip

    • Lift front fender up to remove headlamp assembly.
    • Disconnect the electrical connector.
    • Aim lamp as necessary.
    • The front wheelhouse liner has an access door for bulb replacement.

Front Side Marker Lamp Replacement

Preliminary Procedures

Remove the front wheelhouse liner to gain access to the front side marker lamp. Refer to Fender, Insulator, Liner, Brake Caliper Cooling Duct Replacement - Front in Bumpers.

4

Front Side Marker Lamp Assembly

Tip

    • Release the tab from the inside of the fascia and push outward to replace the lamp assembly.
    • Twist the bulb socket and pull inward to replace the bulb.

Repeater Lamp Replacement (Export)

Preliminary Procedures

Remove the rear front wheelhouse liner to gain access to the repeater lamp. Refer to Fender, Insulator, Liner, Brake Caliper Cooling Duct Replacement - Front in Bumpers.

5

Repeater Lamp

Tip

    • Release the tab from the inside of the fascia and push outward to replace the lamp assembly.
    • Twist the bulb socket and pull inward to replace the bulb.

Fog Lamp Assembly Replacement

6

Fog Lamp Bolts (Qty: 3)

Tighten
2 N·m (18 lb in)

7

Front Turn Signal Lamp Assembly

Caution: Refer to Halogen Bulb Caution in the Preface section.

Tip

    • Twist the bulb socket and pull inward to replace the bulb.
    • Aim as necessary.