Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Lift and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the left front wheel. Refer to Tire and Wheel Removal and Installation .
3. Remove the left fender liner. Refer to Fender, Insulator, Liner, Brake Caliper Cooling Duct Replacement - Front .

Headlamp Washer Solvent Container Replacement

1

Retainer, Headlamp Washer Solvent Tank (Qty: 1)

2

Bolt, Windshield Washer Solvent Container (Qty: 2)

Tighten
9 N·m (80 lb in)

3

Container Assembly, Windshield Washer Solvent

Tip

1. Disconnect the washer hose and the drain washer solvent.
2. Disconnect the electrical connector.

4

Cap, Washer Bottle

Windshield Washer Pump Replacement

5

Pump Assembly, Windshield Washer

6

Grommet, Windshield Washer Pump

Windshield Washer Solvent Level Switch Replacement

7

Seal, Windshield Washer Solvent Level Switch

8

Switch, Windshield Washer Solvent Level

Tip

1. Drain the washer fluid and refill when finished with the replacement.
2. Disconnect the electrical connector and reconnect when finished with the replacement.
3. Using 2 flat-bladed tools, pry outward the washer solvent container level sensor switch from the solvent container.
4. Use equal inward pressure to seat the level sensor switch into the seal.