GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Corvette 🢒 Preface 🢒 Cautions and Notices 🢒 Wiper Arm, Blade, Insert Replacement - Front

Object Number: 1500783 Size: LF

Callout

Component Name

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Cap, Wiper Arm (Qty: 2)

2

Nut, Wiper Arm (Qty: 2)

Tighten
25 N·m (18 lb ft)

3

Wiper Arm, Wiper Arm Assembly

Tip
Use the J 39637 Wiper Arm Puller to remove the wiper arm from the wiper arm drive spindle.

4

Wiper Blade Assembly

Tip

    • Keep the wiper blade claws in the rubber claw channel of the wiper blade element. Do not allow the claws of the wiper blade to contact the metal spline of the wiper blade element.
    • To replace element, remove the bottom claws of the wiper blade element from the notches in the element of the wiper blade.