If your vehicle has this feature, memory can program and recall the settings for the driver's seating position. The controls for this feature are located on the driver's door.
The numbers on the back of the keyless access transmitters, 1 and 2, correspond to the numbers on the memory buttons.
To program each button, use the following steps:
- Adjust the settings for the driver's seat position, both outside mirrors, and the telescopic steering column position to a comfortable driving position.
- Press and hold button 1 until two beeps are heard, then release the button.
Your settings are now programmed.
A second seating, mirror, and telescopic steering column position can be programmed by repeating the above steps and pressing button 2 for driver 2.
To recall a memory position, do one of the following:
| • | If you have an automatic transmission vehicle, press and release the desired button 1 or 2 while the vehicle is in PARK (P). |
| A single beep will sound and the memory position will be recalled after a brief delay. |
| If the vehicle is not in PARK (P), three beeps will sound and the memory position will not be recalled. |
| • | If you have a manual transmission vehicle, press and release the desired button 1 or 2. If the vehicle is on, the parking brake needs to be set to recall the memory position. |
| A single beep will sound and the memory position will be recalled after a brief delay. |
| If the vehicle is on and the parking brake is not set, three beeps will sound and the memory position will not be recalled. |
If your vehicle has the Auto Memory Recall feature and it is turned on in the Driver Information Center (DIC), the seat, mirrors, and telescopic steering column position will automatically adjust to their programmed positions when the engine is started. See "Auto Memory Recall" under DIC Vehicle Personalization for more information.
To stop recall movement of the memory feature at any time, press one of the power seat controls, power mirror control buttons, memory buttons, or the telescopic steering column switch.
Easy Exit Seat
Two personalized exit positions can also be programmed to allow for an easy exit or entry into the vehicle. The controls for this memory function are located on the driver's door.
(Easy Exit Seat): This button is used to program and recall the desired driver's seat exit position.To program an exit position, use the following steps:
- Recall the desired driving position by pressing button 1 or 2.
- Position the seat and the telescopic steering column position to a comfortable exit position.
- Press and hold the exit button until two beeps sound.
The seat will move to the programmed memory position.
Your exit position is now programmed.
A second exit position can be programmed by repeating the above steps and pressing the other memory button.
To recall an exit position, do one of the following:
| • | If you have an automatic transmission vehicle, press and release the exit button while the vehicle is in PARK (P). |
| One beep will sound and the exit position for the currently identified driver will be recalled. |
| • | If you have a manual transmission vehicle, press and release the exit button. The parking brake needs to be set to recall the memory position. |
| One beep will sound and the exit position for the currently identified driver will be recalled. |
If your vehicle has the Auto Exit Recall feature and it is turned on in the DIC, automatic seat and telescopic steering column movement to the exit position will occur when you use the keyless access transmitter to unlock your vehicle or when you turn the engine off and open the driver's door. See "Auto Exit Recall" under DIC Vehicle Personalization for more information.
