Service VME 2005 Chevrolet Corvette Glove Box Door Warped or Extends Outwards - kw adjust appearance dash door fit glove box trim
| Subject: | Service VME 2005 Chevrolet Corvette Glove Box Door Warped Or Extends Outwards |
| Models: | . |
.
The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in the PI.
Service VME:
This is a Service VME to all Chevrolet Dealers regarding the glove box door on the 2005 Corvettes. Some owners may comment that the glove box door appears warped and extends outward near the center IP. The root cause may be the torque sequence when the door was installed by the plant. To correct the condition dealers should loosen the attaching screws at the bottom of the glove box door and retighten the door beginning with the outboard screw, the one on the right side and then the inboard screws.
.
Please follow this diagnosis process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.
.
Models:
(2005 Chevrolet Corvette)
